Custom Made · Treadmill Cover

Custom Made Treadmill Cover

Reflective & Water Resistant 350gsm Silver Laminated Woven Polypropylene
Made to Measure Cut to your exact dimensions
Made in 3 Weeks Express options available
Nationwide Delivery Tracked courier delivery

Protect your outdoor treadmill with a cover made to fit the actual footprint of your machine, not a generic size that leaves gaps at the sides or bunches at the base.

Each cover is made from 350gsm silver laminated woven polypropylene. The reflective coated exterior sheds rain and bounces sunlight away, keeping rain, dust, sun, and insects off the console, motor, and belt.

Generic treadmill covers are made for a handful of standard sizes, and most machines fall somewhere between two of them. That means a loose fit, pooling water, and exposure at the base.

A made-to-measure cover drops cleanly over your machine, sits flush at every edge, and keeps weather out of the electronics and motor housing wherever the treadmill is stored.

Enter your measurements below for an instant price.

Get a Quote Get an estimated price in 4 easy steps
Step 01 Enter Your Measurements

Measure your treadmill with the handlebars in their stored or folded position, whichever is how you normally leave the machine. Length runs from the front console end to the rear of the belt deck. Width is the widest point, usually across the belt or deck. Height is from the floor to the top of the console or highest point of the handlebars in stored position.

Diagram showing measurement points on treadmill cover
cm
cm
cm
cm
cm
cm
Step 02 Choose Your Colour
Step 03 Tie Length
Tie lengths are standard 30 cm. Your cover will include six webbing tie-downs cut to 30 cm — the most practical length for securing covers to outdoor furniture legs.
Step 04 Select Your Preferred Lead Time

Category: Specialty Covers

Get in Touch

Contact Us Directly For A Custom Quote

Send your full measurements and even images of what you need covered and a team member will personally reply with a custom quote.

Message sent!

Thanks for getting in touch. We'll get back to you with a custom quote within one business day.

Measuring guidelines

  • Fold or stow the handlebars in the position you normally leave the machine. Measure with them in that position, not extended for use.
  • Length runs from the front of the console end to the very back of the belt deck. Include any protruding rear caps or feet.
  • Width is the widest point of the machine, usually across the belt platform or the console support arms.
  • Height is from the floor to the highest fixed point — typically the top of the console screen or the top of the handlebars in their stored position.

Cover features

  • A clean, fabric-style outer face that suits a furnished outdoor space rather than the tarpaulin look you get from budget covers.
  • Six webbing tie-down points spaced around the base so the cover stays put when the wind picks up.
  • For furniture without legs to anchor to, an elastic perimeter can be sewn around the bottom edge instead. Just request this when placing your order.
  • A polyurethane waterproof layer bonded to the underside that holds up under UV exposure without flaking or breaking down.
  • Double-folded, twice-stitched seams that hide the raw edge of the fabric and keep stitch lines protected from water ingress.
  • No PVC anywhere in the construction, which means no cracking or splitting along the fold lines after a season or two of sun.
  • Solution-dyed polyester face fabric. Colour runs all the way through every fibre, so fading is dramatically reduced even through long Irish summer days.
  • A drawstring carry bag is included for storing the cover when guests are over or during the warmer months.
  • Light enough that one person can fit and remove it without help.
  • Backed by a warranty against premature fading and loss of waterproofing.
Please review your measurements carefully before submitting. Each cover is cut to the dimensions you provide, so we are unable to offer change-of-mind returns or cancel an order once production has begun.

Built to fit, not adapted to suit

Standard treadmill covers come in a handful of sizes, but treadmills vary considerably between brands and models. A cover that is too wide pools water and catches wind. A cover that is too short exposes the motor housing at the rear. A custom-made cover is cut from your measurements and fits cleanly over the machine as it actually sits in your space.

One material, one quality, one price tier

Every cover we make uses the same 350gsm silver laminated woven polypropylene. The woven base is tough and tear-resistant, and the silver coating on the outside reflects sunlight and sheds rain. There is no budget tier and no premium upgrade. Whether you are covering a compact fold-up treadmill or a full-size commercial-style machine, you are getting the same material and construction.

Product specifications at a glance

ShapeRectangle
Number of measurementsThree (length, width, height)
Production turnaroundStandard 4 weeks · Express 3 weeks · Priority Express 10–14 days
Available coloursSilver
Outer fabric200gsm solution-dyed polyester, UV stabilised
Waterproof layerPolyurethane (PU) coating bonded to the underside
Seam constructionDouble-folded and twice-stitched at every panel join
Tie lengthStandard 30 cm webbing tie-downs
What's in the boxYour made-to-measure cover, tie-downs, drawstring carry bag
WarrantyCoverage against premature fading and loss of waterproofing
ShippingTracked courier across every county in Ireland

Got Questions?

Frequently Asked Questions

Everything you need to know about ordering a custom treadmill cover.

Should I measure with the handlebars folded down or upright?

Measure with the handlebars in the position you normally store the machine. If you fold them down for storage, measure with them down. If you leave them upright, measure with them upright. The cover is made for the machine as you leave it.

Does the height measurement include the console display?

Yes. Height runs from the floor to the very top of the machine, which on most treadmills is the top edge of the console display or the top of the handlebar uprights. Include whatever is the highest point in the stored position.

My treadmill folds vertically to save space. How do I measure it?

If you store the treadmill in its folded vertical position, measure the folded configuration. Length would be the height of the folded machine, width across the deck, and height the depth front to back in that position. Note in your order comments that the machine is stored folded vertically.

Will this cover fit an elliptical trainer?

This cover is designed for treadmills. Elliptical trainers have a different profile, particularly at the top where the arm handles extend. If you need a cover for an elliptical, contact us and we can help with a custom solution for that shape.

Does the cover allow ventilation, or will moisture build up underneath?

The cover is designed to keep weather out from above and around the sides. If the treadmill is stored in a naturally ventilated space like a patio or alfresco, air exchange happens from the base opening. For enclosed spaces with no airflow, allow the machine to fully cool and dry before covering.

The Complete Guide

Custom Made Treadmill Covers — The Complete Owner's Guide

6 min read Updated 2025 Custom Cover Company

Outdoor treadmills deal with a range of conditions that indoor machines never see. This guide walks through how to measure for a custom cover and why the material choice matters for long-term protection.

Why outdoor treadmills need proper cover

The console is the most vulnerable part of any treadmill. It contains the electronics, the display, and the control board. On an indoor machine that is never an issue, but an outdoor treadmill on a patio or in an open garage can catch rain, morning dew, and windborne dust every day it is not in use.

Most people learn this the hard way. Water gets into the console through a gap at the top or sides of a loose-fitting cover, or through no cover at all. The first thing to go is usually the display, followed by the motor controller. Replacing a console board costs several hundred dollars. A cover costs far less.

The belt and motor housing are also exposed. UV breaks down rubber and plastic over time, making the belt brittle and prone to cracking. A cover that sits flush over the whole machine protects all of it.

How to take the three measurements

Length

Length runs from the front of the machine to the back. On most treadmills the front is the console end and the back is the far end of the belt deck. Measure from the outermost point at the front, including any console overhang, to the very back of the machine including any rear feet or end caps.

Width

Width is the widest point of the machine measured side to side. On most treadmills this is across the belt platform or the console support arms. Take the measurement at whatever level the machine is widest.

Height

Height runs from the floor to the highest point of the machine in its stored or resting position. On most treadmills this is the top of the console screen. If the handlebars extend above the console, measure to the top of the handlebars. Always measure with the machine configured as you normally leave it.

If your treadmill has handlebars that fold down for storage, measure with them folded. The cover is built for the machine as it sits, not as it would look in use.

Material and why it matters for treadmills

Treadmills have a large flat top surface: the console and the area around it. Water that lands on top of a loose or poorly shaped cover sits there rather than running off. That is why water resistance and fit both matter.

The fabric is 350gsm silver laminated woven polypropylene. The base is a woven polypropylene, which is strong, tough, and tear-resistant. It does not stretch out of shape or rip along seams the way a thin cover does.

The outside carries a silver laminate coating. That coating is reflective, so it bounces sunlight away. The cover and the machine underneath stay cooler, and the sun does not break down the cover the way it would a plain fabric left out in the open.

The same coating is water resistant. Rain beads up and runs off to the sides rather than soaking through, so the console and motor stay dry underneath. Cheap covers that lack a proper coating soak through and fail within a season or two.

Caring for your treadmill cover

Brush or shake off any dust or debris before fitting the cover. Grit caught between the cover and the machine can scratch the console casing over time.

Rinse the outside of the cover with a hose every few months. If any moisture gets underneath during an unusually heavy storm, allow both the cover and the machine to dry completely before replacing the cover.

Do not machine wash the cover. The agitation breaks down the silver coating quickly. Spot cleaning with warm water and a soft cloth is all that is needed for any marks or stains.

Store the cover folded loosely when not in use rather than compressed tightly. Varying the fold points each time avoids repeated stress on the same sections of the material.

Get an Instant Quote

Not sure how to measure?

Our team is happy to help. Send us a photo of your treadmill and rough dimensions and we will sort out the measurements for you.

Contact Our Team

Keep your outdoor treadmill protected from rain, UV, and dust with a cover made to your exact measurements. Waterproof 200gsm polyester. Ships Ireland-wide.

🛒